Open Joint-Stock Company
606000, Nizhny Novgorod oblast, Russia
phone: 8313 574275, 552444
574114, 574205, 574376
Marketing dpt.: 574319, 574316, 574366
Sales dpt.: 574104, 574213, 574203, 574311
fax: 8313 331338, 332959
teletype: 651827 Plast
Issue N7, 1999
| PLASTIK
Open Joint-Stock Company |
|
Dzerzhinsk 606000, Nizhny Novgorod oblast, Russia phone: 8313 574275, 552444 574114, 574205, 574376 Marketing dpt.: 574319, 574316, 574366 Sales dpt.: 574104, 574213, 574203, 574311 fax: 8313 331338, 332959 teletype: 651827 Plast |
General Director: Valery Larionov
Commercial Director: Vladimir Smotrizky
Chief Engineer: Victor Volkov
Plastik, an open joint-stock company located in Dzerzhinsk, is set up in 1965. OAO Plastik is focused on production of plastic items and polymer films.
The range of the output products includes:
— polyethylene film GOST 10354-82, sleeve shaped, half-sleeve shaped, panel;
— polyethylene stabilisation film: single layer, multi-layer and multi-layer with an additive against sticking;
— thermo-shrinkage polymer film GOST 25951-83 for shaping single items and packing;
— polyethylene film for milk and milk product packing with coloured printing;
— high elasticity film for product packing on European standard pallets;
— polyvinilchloride rigid film for packing of food stuffs, pharmaceuticals, confectioneries, blister packs for consumer goods;
— powder polyvinilchloride (PVC) composition for production of containers for food stuffs;
— granulated plasticates on PVC tar base, including cable;
— sheet PVC plasticate type 57 - 40 for lining of electroplating baths;
— buckled plastic sheets for roofing;
— bags and packs of polyethylene film of various sizes, including with coloured printing;
— glass plastic items, including tubes of various diameters, heaters of specific capacity of 1700 W\m2;
— industrial wiping napkins for motor vehicle body wiping after priming before paint coating;
— gas cleaning units for thermal power stations;
— structured polycarbonade sheets;
— low pressure polyethylene sheets;
— non-plasified plolyvinilchloride sheets (viniplast);
— plastic components produced by extrusion techniques, including blown-out items, thermo-resistant tubes, insulation sleeves, sections etc;
— plastic items produced by moulding techniques under pressure and pressing;
— protection helmets;
— polymer containers, including crates for bottles, crates for milk products, folding crates for vegetables, polyethylene buckets, basins of various volume;
— plastic consumer goods.
The firm’s needs:
— high pressure polyethylene, type 158-03-020, 153-13-130, 153-03-003;
— suspension polyvinilchloride, type C-5868 PJ.
Nizhny Novgorod Business Encyclopedia | Search | Parsek | Business on Nizhny Novgorod on-line
Nizhny Novgorod, 1999
